Prepare for final report.

After the presentation was completed on last week. The next progress that need to be completed is the Final Report. On this week, i really focus to complete my Final report. This Final Year report contain 35% of the carry marks. The presentation contains 35% and the blogs contain 30% of the carry marks. Total up the marks will get 100%. I already done Chapter 1, Chapter 2, Chapter 3, Chapter 4. I will complete my Final Report by next week insyallah.

Presentation day

Today is the presentation day. Im bring my project to the Unikl Bmi to present and demonstrate my project. Below are the picture of me and my friends after the presentation.

Most of the student in this picture are under Miss NorrolHoda from electrical section. We take picture together as a memory for this day.

Poster for industry day

 

Today i would like to design the poster for the industry day. this poster need to include:

             1. objective

             2. methodology

             3. diagram

             4. application

             5. description

             6. result

             7. reference

After design the poster, this poster need to be printed on A1 size. After design  this poster i print this poster at WAQED,UIA.

Circuit complete

Below are the picture of the complete circuit for control and monitor temperature by scada. This circuit attached at the pail in order to check the current temperature.

Complete Circuit

Finishing the hardware

Today, i would like to assemble the hardware and the circuit. Here i attach the picture that i already completed assembled.

From figure above, the circuit of control and monitor temperature project was put at below of the hardware. It attach at the pail because near to water for the sensor detect the temperature. 

This is the view of the complete project of control and monitor temperature by scada system.

Design Hardware

After buy the wood and the equipment that need to make hardware of this project. the first things that need to is to design the hardware where want to put the item to look like view at hot spring. below are the picture of designing the hardware.

 

before put the glue. the arrangement need to be done in order to make it look nicely. This hardware is to look like at hot spring because the viewer can easily understand  what this project is all about. 

 

Completed design of the hardware.

Testing Project

 

Today i would like to share result of testing of my project. from the figure there are two component that i need to test which is the heater and the water pump. The testing is to ensure that the heater and the water pump can operate when it receive the signal from computer. This test was successfully done  because the heater and the pump can operate as want i wanted.

Drill and Solder

after etching process the pcb board need to be drill in order to insert the component at the pcb board. after the drilling process then it will continue the soldering process.

soldering all the component at the pcb board. After complete the soldering process the leg of component need to be cut to prevent the short circuit.

Visual Basic

Today i want to share with you guys about the visual basic.  

Visual basic (VB) is a development tool to create application within the windows environment. With the expansions of applications, Visual Basic use a Visual approach to plan its user interface, which called graphical user interface (GUI). This is one of the ways to interface between computer and human which can manipulated by mouse or a keyboard.

Graphical User Interface

This project control and monitor temperature was used the Visual Basic to control and monitor. Figure above are the picture of the layout on Visual basic that i already made.

Buy component

Today, i walk at Jalan Pasar to search component needed in my project which is control and monitor temperature by scada. Below are the picture of the shop that i go to buy the component.

Below are the component and equipment that i was looked at Jalan Pasar.
                  1.Voltage Regulator 3.3v & 5v
                  2. Resistor 1k ohm
                  3. PIC 18F4520
                  4. Transistor
                  5.  capacitor 0.1 micro farad
                  6. Relay 5Vdc
                  7.  Diode 1N4148
                  8. USB to UART converter
                  9.  Xbee module x2
                  10. Pcb board

Serial port

From the figure, you can see the development of the serial port. The new technology is the USB to UART converter. The conventional method are rarely used nowadays because nowadays many people used laptop to interface with their microcontroller. So, laptop don't have the port for RS232 that why USB to UART important nowadays. This project control and monitor temperature was use the USB to UART converter in order to communicate the microcontroller with PC.

Etching

1. print layout with transparent plastic

2. cut the transparent plastic match with pcb board

3. open sticker layer at pcb board

4. compare the pcb with the actual diagram

5. cover the pcb with cloth or paper. then put iron on top of pcb board

6.the layout will attach at the pcb board

7. prepare the etching powder to remove the copper at pcb board.

8. start the process etching to remove the copper.

9. clean it up and you will get your pcb layout.

Design pcb

im using the ARES software to create my PCB layout. The figure show the PCB layout of my Project.

Design Circuit

this are the circuit that i design which to control and monitor temperature.

Do monitoring

Assalamualaikum... this week is the first week of the new semester. current progress is  to continue monitoring part as in schedule. Learning about Visual Basic. and how to interface with the hardware. Visual basic is one of the software that can be interface to the sensor. Here i attach the link where i learn the fundamental of Visual Basic.
Link:
http://visualbasic.freetutes.com/learn-vb6/